User Manual
Table Of Contents
- Contents
- 1. Hardware
- 2. Install and Access the Switch in Your Network
- 3. Optimize the Switch Performance
- 4. Use VLANS for Traffic Segmentation
- 5. Manage the Switch in Your Network
- 6. Maintain and Monitor the Switch
- Manually check for new switch firmware and update the switch
- Manage the configuration file
- Return the switch to its factory default settings
- Control access to the device UI
- Change or lift access restrictions to the switch
- Manage the DoS prevention mode
- Manage the power saving mode
- Control the port LEDs
- Change the switch device name
- View system information
- View switch connections
- View the status of a port
- PoE considerations for switches that support PoE
- Manage the PoE ports
- Display PoE port status
- Power cycle the PoE ports
- 7. Diagnostics and Troubleshooting
- A. Factory Default Settings and Technical Specifications
- B. Additional Switch Discovery and Access Information
6
Maintain and Monitor the Switch
This chapter describes how you can maintain and monitor the switch.
The chapter contains the following sections:
• Manually check for new switch firmware and update the switch
• Manage the configuration file
• Return the switch to its factory default settings
• Control access to the device UI
• Change or lift access restrictions to the switch
• Manage the DoS prevention mode
• Manage the power saving mode
• Control the port LEDs
• Change the switch device name
• View system information
• View switch connections
• View the status of a port
• PoE considerations for switches that support PoE
• Manage the PoE ports
• Display PoE port status
• Power cycle the PoE ports
68