Installation Guide 16-port Gigabit Ethernet Unmanaged High-Power PoE+ Switch with FlexPoE Models GS316P and GS316PP Package contents • Switch • Power cord (varies by region) • Power Adapter (130W for GS316P/200W for GS316PP) • Wall installation kit • Rubber feet • Mounting ties (for power adapter) • Installation guide
Register with the NETGEAR Insight app 1. Search for NETGEAR Insight and download the latest app. 2. Set up a NETGEAR account if you do not have one. 3. Tap the menu in the upper-left corner. 4. Tap REGISTER ANY NETGEAR DEVICE. 5. Enter the serial number located on the bottom of the switch, or use the camera on your mobile device to scan the serial number bar code. 6. Tap GO. The switch is registered and added to your account. You can now view the switch in the NETGEAR Insight app.
1. Connect network devices to the ports on the switch. 2. Connect an RJ-45 port on the switch to a network. Note: ,Q D VPDOO RIŴFH RU KRPH RIŴFH QHWZRUN FRQQHFW WKH VZLWFK WR WKH /$1 port of a router that, in turn, is connected to an Internet modem. 3. Power on the switch. PoE considerations The switch prioritizes the PoE+ power that it supplies in ascending port order (from port 1 to port 16).
Device class Standard Class description Minimum power allocated to the powered device Range of power delivered to the powered device 1 PoE and PoE+ Very low power 4.0W 0.44W–3.84W 2 PoE and PoE+ /RZ SRZHU 7.0W 3.84W–6.49W 3 PoE and PoE+ Mid power 15.4W 6.49W–12.95W 4 PoE+ only High power 30.0W 12.95W–25.5W PoE troubleshooting Here are some tips for correcting PoE problems that might occur: • 0DNH VXUH WKDW WKH 3R( 0D[ /(' LV RII ,I WKH 3R( 0D[ /(' LV VROLG \HOORZ disconnect one
Check the PoE status Power LED Left Port LEDs Right PoE LEDs On 1000 Mbps link PoE in use Off 100 or 10 Mbps link PoE halted (see PoE troubleshooting) Activity (blinking) No PoE use (off) No link (off) The switch can supply up to 30W PoE+ (IEEE 802.3at) to each port, with a maximum PoE power budget of 76W total with a 90W power adapter, a 115W total with a 130W power adapter and a 183W total with a 200W power adapter across all active PoE+ ports.
Attach the switch to a wall To attach the switch to a wall, you need the wall-mount screws that are supplied with the switch. To attach the switch to a wall: 1. /RFDWH WKH WZR PRXQW KROHV RQ WKH ERWWRP SDQHO RI WKH VZLWFK 2. Mark and drill two mounting holes in the wall where you want to mount the switch. The two mounting holes must be at a precise distance of 4.27 in. (108.4 mm) from each other. 3. Insert the supplied anchors into the wall and tighten the supplied screws with a No.
6SHFLĬFDWLRQV 6SHFLĬFDWLRQ Description Network interfaces 16 Gigabit Ethernet RJ-45 ports that support 1G, 100 M, and 10 M 16 PoE/PoE+ ports Power adapter input Power adapter varies by region. Power adapter output The switch supports three power adapters: 200W: 54V @ 3.7A 130W: 54V @ 2.4A 90W: 54V @ 1.66A Max PoE budget The maximum budget for each power adapter is as follows: 200W: 183W PoE 130W: 115W PoE 90W: 76W PoE Dimensions (W x D x H) 11.26 x 4.02 x 1.06 in. (286 x 102 x 27 mm) Weight 1.
Support Thank you for purchasing this NETGEAR product. You can visit https://www.netgear.com/support/ to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that \RX XVH RQO\ RIŴFLDO 1(7*($5 VXSSRUW UHVRXUFHV Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à https://www.netgear.com/support/download/. (If this product is sold in Canada, you can access this document in Canadian French at https://www.
