User Manual

S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Switches
Get Started User Manual19
4. If the browser does not display the login window, do the following:
• If your browser displays a security warning, dismiss the warning by doing one of the
following
- Google Chrome. Click the ADVANCED link. Then, click the Proceed to x.x.x.x
(unsafe) link, in which x.x.x.x represents the domain name or IP address of the
device.
- Apple Safari. Click the Show Details button. Then, click the visit this website
link. If a warning pop-up window displays, click the Visit Website button. If
another pop-up window displays to let you confirm changes to your certificate
trust settings, enter your Mac user name and password and click the Update
Setting button.
- Mozilla Firefox. Click the ADVANCED button. Then, click the Add Exception
button. In the pop-up window that displays, click the Confirm Security Exception
button.
- Microsoft Edge: Select Details > Go on to the webpage.
- Microsoft Internet Explorer. Click the Continue to this website (not
recommended) link.
• If you use a wired Ethernet connection, make sure that the computer is connected to
the same network that the switch is attached to or directly to one of the LAN Ethernet
ports of the switch.
• If you use a mobile device, make sure that mobile device is connected to an access
point that is attached to the same network that the switch is connected to or that the
access point is directly attached to one of the LAN Ethernet ports of the switch.
• Make sure that the switch is receiving power and that its Power LED is lit.
• Close and reopen the browser.
5. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
The following figure shows the layout of the local browser interface.