Owner's Manual

GS700TP Smart Switch Software Administration Manual
4-32 Configuring Switching Settings
v1.0, April 2008
• “CST Configuration”
• “CST Port Configuration”
• “Rapid STP”
STP Configuration
The Advanced STP Configuration screen contains parameters for enabling STP on the device.
To configure STP on the device:
1. Click Switching > STP > Advanced > STP Configuration. The Advanced STP
Configuration screen displays:
The Advanced STP Configuration screen contains the following fields:
Global Settings
• Spanning Tree State – Select the STP state on the device. The possible field values are:
– Enable – Enable STP on the device.
– Disable – Disable STP on the device.
• STP Operation Mode – Select the STP mode on the device. The possible field values are:
– STP – Enable classic STP on the device.
– RSTP – Enable Rapid Spanning Tree (RSTP) on the device.
Figure 4-21