Installation Guide

Installation

48-Port Gigabit Ethernet

Smart Managed Plus Switch

GS750E

Step 2. Connect power.

Step 1. Connect the equipment. Step 3. Check the status.

Power LED Port LEDs (Ports 1–48) SFP LED

On 1000 Mbps link 1 Gps link

O 100 or 10 Mbps link 100 Mbps link

Activity (blinking) No link (o)

No link (o)

Server

Workstations

Switch

Package Contents

• NETGEAR 48-Port Gigabit Ethernet Smart Managed Plus Switch

• AC power cord (localized to country of sale)

• Rubber footpads for tabletop installation

• 19-inch rack-mount kit for rack installation

• Rubber protection caps for SFP ports

• Installation guide

Switch

Installation guide

(this document)

Rubber feet

AC power cord

(localized to

region)

PAGE 1
Installation 48-Port Gigabit Ethernet Smart Managed Plus Switch Step 1. Connect the equipment. Step 3. Check the status. GS750E Server Power LED Switch Workstations Package Contents • NETGEAR 48-Port Gigabit Ethernet Smart Managed Plus Switch • AC power cord (localized to country of sale) • Rubber footpads for tabletop installation • 19-inch rack-mount kit for rack installation • Rubber protection caps for SFP ports • Installation guide Step 2. Connect power.
PAGE 2
Configuring the Switch Smart Managed Plus switches are plug-and-play, so they can be used without any configuration. You can also configure and manage additional advanced features of the switch either by using your computer’s web browser or by installing the ProSAFE Plus Configuration Utility on your Windows-based computer. Web Browser Access You can configure a switch when it is connected only to your computer (off‑network), or connected to your computer and your network (on‑network).