User Manual
Table Of Contents
- Contents
- 1. Get Started
- 2. Use VLANS for Traffic Segmentation
- VLAN overview
- Create basic port-based VLANs
- Assign ports to multiple port-based VLANs
- Create 802.1Q-based VLANs in a basic configuration
- Create 802.1Q-based VLANs in an advanced configuration
- Add tagged or untagged ports to an 802.1Q-based VLAN
- Specify a port PVID for an 802.1Q-based VLAN
- Manage the voice VLAN
- 3. Optimize Performance With Quality of Service
- 4. Manage Security
- 5. Manage Network Settings
- 6. Manage and Monitor the Switch
- Manage flow control
- Manage the port speed and the port status
- Enable loop prevention
- Manage power saving options
- Manually download and upgrade the firmware
- Reboot the switch
- Save the switch configuration
- Restore a saved switch configuration
- Restore factory default settings
- Enable port mirroring
- View switch information or change the switch device name
- View or clear the port statistics
- 7. Diagnostics and Troubleshooting
- A. Factory Default Settings
(Continued)
CommentsPublish DatePublication Part
Number
Added with 2 SFP Ports to the switch name.
Revised Configure the switch on page 7.
Revised Access a switch that is connected to a network on page 8.
Added Use the NETGEAR Switch Discovery Tool to access the switch on page
9.
Added Access the switch from a Mac using Bonjour on page 11.
Removed references to the resource CD.
Made multiple minor changes.
October 2018202-11784-02
First publication.July 2017202-11784-01
3
48-Port Gigabit Ethernet Plus Switch with 2 SFP Ports Model GS750E