User Manual
Table Of Contents
- Contents
- 1. Get Started
- 2. Use VLANS for Traffic Segmentation
- VLAN overview
- Create basic port-based VLANs
- Assign ports to multiple port-based VLANs
- Create 802.1Q-based VLANs in a basic configuration
- Create 802.1Q-based VLANs in an advanced configuration
- Add tagged or untagged ports to an 802.1Q-based VLAN
- Specify a port PVID for an 802.1Q-based VLAN
- Manage the voice VLAN
- 3. Optimize Performance With Quality of Service
- 4. Manage Security
- 5. Manage Network Settings
- 6. Manage and Monitor the Switch
- Manage flow control
- Manage the port speed and the port status
- Enable loop prevention
- Manage power saving options
- Manually download and upgrade the firmware
- Reboot the switch
- Save the switch configuration
- Restore a saved switch configuration
- Restore factory default settings
- Enable port mirroring
- View switch information or change the switch device name
- View or clear the port statistics
- 7. Diagnostics and Troubleshooting
- A. Factory Default Settings
Contents
Chapter 1 Get Started
Related documentation.......................................................................7
Configure the switch............................................................................7
Access the switch using a web browser.............................................7
Access a switch that is connected to a network...........................8
Access a switch that is off-network.................................................9
Use the NETGEAR Switch Discovery Tool to access the switch......9
Access the switch from a Mac using Bonjour..................................11
Change the switch password............................................................11
Change the language of the device UI............................................12
Register your product........................................................................13
Chapter 2 Use VLANS for Traffic Segmentation
VLAN overview....................................................................................16
Create basic port-based VLANs.......................................................16
Assign ports to multiple port-based VLANs....................................18
Create 802.1Q-based VLANs in a basic configuration..................19
Create 802.1Q-based VLANs in an advanced configuration........21
Add tagged or untagged ports to an 802.1Q-based VLAN.........23
Specify a port PVID for an 802.1Q-based VLAN.............................24
Manage the voice VLAN....................................................................26
Specify the voice VLAN properties..............................................26
Enable the voice VLAN mode for ports.......................................27
Manage the OUI table...................................................................28
Chapter 3 Optimize Performance With Quality of Service
Enable 802.1p/DSCP-based quality of service...............................32
Configure port-based quality of service..........................................33
Set up rate limiting.............................................................................34
Set up broadcast filtering..................................................................35
Chapter 4 Manage Security
Manage access control......................................................................39
Add devices to the Access Control table....................................39
Remove devices from the Access Control table........................40
Set the switch management mode...................................................41
4