User Manual

5. Select System > LAG > LAG Membership.
6. In the LAG ID menu, select the LAG ID.
You can select a LAG ID from 1 to 8.
7.
Enter a name in the LAG Name field.
You can enter a name of up to 15 alphanumeric characters.
8.
Select the ports for the LAG by selecting the check boxes that are associated with
the port numbers.
A LAG consists of at least two ports.
9. Click the Apply button.
Your settings are saved.
10.
To enable the LAG as an LACP LAG, do the following:
a.
Select System > LAG > LAG Configuration.
b.
Select the LAG ID of the LAG for which you just set up the port membership.
c. In the Admin Mode menu, select Enable.
d. In the LAG Type menu, select LACP.
The Port Member field for the selected LAG ID shows the ports that you selected
inStep 8.
The LAG Status field for the selected LAG ID shows whether the LAG is established
(Up) or not established (Down).
e. Click the Apply button.
Your settings are saved.
User Manual54Manage Network Settings
48-Port Gigabit Ethernet Plus Switch with 2 SFP Ports Model GS750E