Data Sheet

L3 Services - Routing
Static Routing / ECMP Static Routing
Multiple next hops to a given destination
Load sharing, Redundancy
Default routes
Static Reject routes
IPv4/IPv6
Yes
Yes
Yes
Yes
Port Based Routing Yes
VLAN Routing
802.3ad (LAG) for router ports
Yes
Yes
VRRP
Pingable VRRP interface
VRRP Route/Interface Tracking
IPv4
Yes
Yes
Loopback Interfaces Yes
Tunnel interfaces
Congured 6to4 tunnels
Automatic 6to4 tunnels
6to4 Border Router
IPv4 / IPv6
Yes
Yes
Yes
RIP
RIPv1/RIPv2
IPv4
Yes
Route Redistribution Yes
Enables the exchange of routing information
among different routing protocols operating
within a router
OSPF
OSPFv2 RFC 2328 including older RFC 1583 support
OSPFv3
OSPF Not-So-Stubby Area (NSSA) Option
Forwarding of OSPF Opaque LSAs
Passive interface feature
Static Area Range Costs feature
OSPF Equal Cost Multipath (ECMP)
Dynamically learned ECMP routes
Statically learned ECMP routes
OSPF Max Metric feature
Automatic Exiting of Stub Router Mode feature
Static Area Range Costs feature
OSPF LCA Pacing feature
OSPF Flood Blocking feature
OSPF Transit-Only Network Hiding
IPv4/IPv6
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
IP Multinetting Yes
ICMP throttling Yes
Router Discovery Protocol Yes
DNS Client IPv4/IPv6
IP Helper
Max IP Helper entries
Yes
512
IP Event Dampening IPv4/IPv6
Proxy ARP IPv4/IPv6
ICMP
ICMP redirect detection in hardware
IPv4/IPv6
Yes
Policy Based Routing (PBR)
Based on the size of the packet
Based on the Protocol of the payload (Protocol ID
eld)
Based on Source MAC address
Based on Source or Destination IP address
Based on VLAN tag
Based on Priority(802.1P priority)
IPv4/IPv6
Yes
Yes
Yes
Yes
Yes
Yes
Intelligent Edge Managed Switches
Data Sheet | M4300 series
PAGE 41 of 60