User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual100
Configure DHCP Pool Options
To configure DHCP Pool options:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select System > Services > DHCP Server> DHCP Pool Options.
DNS Server Addresses The list of DNS Server Addresses for the pool. Click the arrow beside
the field name to expand the page and display a table where you can
specify up to eight DNS Server Addresses in order of preference.
NetBIOS Name Server Addresses The list of NetBIOS Name Server
Addresses for the pool. Click the
arrow beside the field name to expand the page and display a table
where you can specify up to eight NetBIOS name server addresses in
order of preference.
NetBIOS Node Type The NetBIOS node type for DHCP clients:
• b-node Broadcast
• p-node Peer-to-Peer
• m-node Mixed
• h-node Hybrid
Next Server Address The Next Server
Address for the pool.
Domain Name The domain name for a DHCP client. Domain Name can be up to 255
characters in length.
Bootfile The name of the default boot image for a DHCP client. File Name can
be up to 128 characters in length.
Table 35. DHCP Pool Configuration (continued)
Field Description