User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual108
3. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select System > Services > DHCP L2 Relay > DHCP L2 Relay Interface Configuration.
5. Use Admin mode to enable or disable the DHCP L2 Relay on the selected interface.
The default is Disable.
6. Use 82 Option T
rust mode to enable or disable an interface to be trusted for DHCP L2
Relay (Option-82) received.
7. Click the Apply button.
Your settings are saved.
View DHCP L2 Relay Interface Statistics
To view the DHCP L2 Relay Interface Statistics:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.