User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual115
The System Information page displays.
4. Select System > Services > DHCPv6 Server > DHCPv6 Prefix Delegation
Configuration.
5. Select from the list of configured Pool Names.
6. In the Prefix and Prefix Length fields, specify the delegated IPv6 prefix.
7. In the DUID field, specify the DUID identifier used to identify the client’
s unique DUID value.
8. Specify the Client Name, which is useful for logging or tracing only
.
The name can be up to 31 alphanumeric characters.
9. Specify the V
alid Lifetime in seconds for the delegated prefix.
Valid values are 0 to 4294967295.
10. Specify the Prefer Lifetime in seconds for the delegated prefix.
Valid values are 0 to 4294967295.
11. Click the Add button.
The delegated prefix is added for the selected pool.
12. Click the Apply button.
Your settings are saved.
Configure DHCPv6 Interface Settings
You can configure the per-interface settings for DHCPv6. The DHCPv6 interface modes are
mutually exclusive. The fields that can be configured on this page depend on the selected
mode for the interface.
To configure DHCPv6 Interface settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select System > Services > DHCPv6 Server > DHCPv6 Interface Configuration.