User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual145
Configure LLDP-MED Interface
To configure LLDP-MED Interface
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select System > LLDP > LLDP-MED > Interface Configuration.
The Link Status field displays the link status of the port (up or down).
The Operational Status field displays whether the LLDP-MED
TLVs are transferred on
this interface.
5. Use Go To Port to enter the Port in unit/slot/port format and click the Go button.
The entry corresponding to the specified Port, is selected.
6. Use Interface to specify the list of ports on which LLDP-MED - 802.1AB can be configured.
7. Use MED Status to specify whether LLDP-MED mode is enabled or disabled on this
interface.
8. Use Notification Status to specify the LLDP-MED topology notification mode of the
interface.
9. Use T
ransmit Type Length Values to specify which optional type length values (TLVs) in
the LLDP-MED is transmitted in the LLDP PDUs frames for the selected interface:
• MED Capabilities.
To transmit the capabilities TLV in LLDP frames.
• Network Policy.
To transmit the network policy TLV in LLDP frames.
• Location Identification.
To transmit the location TLV in LLDP frames.
• Extended Power via MDI - PSE.
To transmit the extended PSE TLV in LLDP frames.