User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual150
View LLDP-MED Remote Device Inventory
To view LLDP-MED remote device inventory:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select System > LLDP > LLDP-MED > Remote Device Inventory.
The following table describes the LLDP-MED Remote Device Inventory fields.
Extended POE PD: Specifies if extended PD TLV is received in LLDP frame on this port.
Required The remote port's PD power requirement.
Source The remote port's PD power source.
Priority The remote port's PD power priority.
Table 52. LLDP-MED Remote Device Inventory
Field Definition
Port The list of all the ports on which LLDP-MED is enabled.
Management Address The advertised management address of the remote system.
MAC Address The MAC address associated with the remote system.
System Model Specifies model name of the remote device.
Software Revision Specifies Software version of the remote device.
Table 51. LLDP-MED Remote Device Information (continued)
Field Description