User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual152
7. Click the Apply button.
Your settings are saved.
Configure a Link Dependency Interface
To configure a link dependency interface:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select System > Link Dependency > Link Dependency Interface Configuration.
5. In the Link Dependency Group ID section of the page, use the Group ID menu to select the
Group ID for which you want to display or configure data.
The range for Group ID is 1 to 16.
6. T
o make changes, do the following:
• Click the Clear button to clear all interfaces from the specified group.
• Click the Refresh button to refresh the page with the latest information on the switch.
7. Click the Apply button.
Your settings are saved.