User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual156
5. Select the Admin mode Disable or Enable radio button.
This specifies whether the ISDP Service is enabled or disabled. The default value is
Enable.
6. In the T
imer field, specify the period of time between sending new ISDP packets.
The range is 5 to 254 seconds. The default value is 30 seconds.
7. In the Hold T
ime field, specify the hold time for ISDP packets that the switch transmits.
The hold time specifies how long a receiving device must store information sent in the
ISDP packet before discarding it.
The range 10 to 255 seconds. The default value is 180
seconds.
8. Select the V
ersion 2 Advertisements Disable or Enable radio button.
This enables or disables the sending of ISDP version 2 packets from the device. The
default value is Enable.
9. Click the Apply button.
Your settings are saved.
The following table describes the ISDP Advanced Global Configuration fields.
Table 56. ISDP Advanced Global Configuration
Field Description
Neighbors table last time changed Displays when the Neighbors table last changed.
Device ID The device ID of this switch.
Device ID Format Capability The device ID format capability.
Device ID Format The device ID format.