User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual157
Configure an ISDP Interface
To configure an ISDP interface:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select System > ISDP >
Advanced > Interface Configuration.
5. Use Port to select the port on which the admin mode is configured.
6. Use Admin mode to enable or disable ISDP on the port.
The default value is Enable.
7. Click the Apply button.
Your settings are saved.
View an ISDP Neighbor
To view an ISDP neighbor:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.