User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual161
• Click the Delete button.
The timer schedule is deleted.
Configure the Timer Schedule
To configure the timer schedule:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select System > Services > T
imer Schedule > Advanced > Schedule Configuration.
5. In the Timer Schedule Name list, select the timer schedule.
6. In the T
imer Schedule Type list, select Absolute or Periodic.
7. In the T
imer Schedule Entry list, select the number of the timer schedule entries to be
configured or added.
If you are adding an entry, select new.
8. In the T
ime Start field, enter the time of the day in format (HH:MM) when the schedule
operation is started.
This field is required. If no time is specified, the schedule does not start running.
9. In the T
ime End field, enter the time of the day in format (HH:MM) when the schedule
operation is terminated.