User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Switching Information User Manual189
The following table describes the nonconfigurable information displayed on the page.
View the VLAN Status
You can view the status of all currently configured VLANs.
To view the VLAN status:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Switching> VLAN >
Advanced > VLAN Status.
Table 66. Advanced VLAN Membership
Field Definition
VLAN Name The name for the VLAN that you selected. It can be up to 32
alphanumeric characters long, including blanks. VLAN ID 1 always
uses the name Default.
VLAN Type The type of the VLAN you selected:
• Default (VLAN ID = 1).
Always present
• Static. A
VLAN that you configured
• Dynamic.
A VLAN created by GVRP registration that you did not
convert to static, and that GVRP can therefore remove