Manualshelf

User Manual

ManualsBrandsNETGEAR ManualsComputers & Accessories48x1G PoE+ 480W, 2x10G, 2xSFP+ Managed Switch
191192193194195196197198199200
Table Of Contents
M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Switching Information User Manual191
5. To display information for all physical ports and LAGs, click the ALL button.
6. Select the interfaces.
Select the Interface check box next to the interfaces.
You can select multiple interfaces.
To select all the interfaces, select the Interface check box in the heading row.
7. In the PVID field, specify the VLAN ID to assign to untagged or priority-tagged frames
received on this port.
The factory default is 1.
8. In the VLAN Member field, specify the VLAN ID or list of VLANs of a member port.
VLAN IDs range from 1 to 4093. The factory default is 1. Use a hyphen (-) to specify a
range or a comma (,) to separate VLAN IDs in a list. Spaces and zeros are not permitted.
9. In the VLAN T
ag field, specify the VLAN ID or list of VLANs of a tagged port.
VLAN IDs range from 1 to 4093. Use a hyphen (-) to specify a range or a comma (,) to
separate VLAN IDs in a list. Spaces and zeros are not permitted.
To reset the VLAN tag
configuration to the defaults, use the None keyword. Port tagging for the VLAN can be
set only if the port is a member of this VLAN.
10. In the Acceptable Frame T
ypes list, specify the types of frames that can be received on
this port.
The options are VLAN only and Admit All:
• When set to VLAN only, untagged frames or priority-tagged frames received on this
port are discarded.
• When set to Admit All, untagged frames or priority-tagged frames received on this
port are accepted and assigned the value of the port VLAN ID for this port. With either
option, VLAN-tagged frames are forwarded in accordance to the 802.1Q VLAN
specification.
11. In the Configured Ingress Filtering field, select Enabled or Disabled.
• When enabled, the frame is discarded if this port is not a member of the VLAN with
which this frame is associated. In a tagged frame, the VLAN is identified by the VLAN
ID in the tag. In an untagged frame, the VLAN is the port VLAN ID specified for the
port that received this frame.