User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
User Manual2
Support and Community
Visit netgear.com/support to get your questions answered and access the latest downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à
https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian French at
https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR's Privacy Policy, visit
https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR's Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of
purchase within your return period.
Do not use this device outdoors. For products that support Power over Ethernet (PoE), the PoE source is intended
for intr
a building connection only.
Trademarks
© NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR
trademarks are used for reference purposes only.
Revision History
Publication
Part Number
Publish Date Comments
202-11998-04 July 2021 We made some minor changes to the maximum allowed PoE power per port
(see
Configure PoE Ports on page 124).
202-11998-03 May 2020 We added the following sections:
•
Configure IGMP Snooping Automatically with IGMP Plus Mode on
page 237.
•
Configure IGMP Snooping for VLANs Automatically with IGMP Plus Mode
on page 242.
•
Configure MLD Snooping Automatically with MLD Plus Mode on
page 250.
•
Configure MLD Snooping for VLANs Automatically with MLD Plus Mode
on page 254.
•
Configure the Port Link Flap Settings on page 276.
•
Add Mroute Static Multicast Entries on page 420.
We revised the following sections:
•
Configure IGMP Snooping Manually on page 238.
•
Configure IGMP Snooping for VLANs Manually on page 243.
•
Configure MLD Snooping Manually on page 251.
•
Configure MLD Snooping for VLANs Manually on page 256.
•
Configure the Memory Log Settings on page 645.