User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Switching Information User Manual202
11. Click the Apply button.
Your settings are saved.
Configure Auto-VoIP
You can configure protocol-based port settings and OUI settings.
Configure Protocol-Based Port Settings
To configure protocol-based port settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Switching >
Auto-VoIP > Protocol-based > Port Settings.
5. In the Prioritization T
ype field, select Traffic Class or Remark.
This specifies the type of prioritization.