User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Switching Information User Manual203
6. In the Class Value list, specify the CoS tag value to be reassigned for packets received on
the voice VLAN when Remark CoS is enabled.
7. Click the Apply button.
Your settings are saved.
Configure Auto-VoIP OUI-Based Properties
To configure auto-VoIP OUI-based properties:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Switching >
Auto-VoIP > OUI-based > Properties.
5. In the V
oIP VLAN ID field, type the VoIP VLAN ID of the switch.
There is no default VLAN for auto-VoIP, you must create a VLAN for it first.
6. In the OUI-based priority list, select the OUI-based priority of the switch.
The default value is 7.
7. Click the Apply button.
Your settings are saved.
OUI-Based Port Settings
To configure auto-VoIP OUI-based port settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.