User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Switching Information User Manual231
8. In the Forward Time field, configure the spanning tree forward delay time for a specified
VLAN.
The range is 4 to 30 seconds. The default value is 15 seconds. This interval is a time for
listening and learning states before transitioning a port to the forwarding state.
9. Use the Max Age field to configure the spanning tree maximum age time for a specified
VLAN.
Max age is the maximum age time before a bridge port saves its configuration
information.
The range is 6 to 40 seconds. The default value is 20 seconds.
10. Configure the bridge Priority of a VLAN.
The allowed values are between 0 and 61440. The valid values are listed in the following
table.
The default value is 32768. If the value configured is not among the specified values,
then it is rounded of
f to the nearest valid value.
11. Click the Add button.
PVST/RPVST is enabled for the selected VLAN.
12. Click the Apply button.
Your settings are saved.
Configure the PVST Interface Settings
You can view and configure Per VLAN Spanning Tree Protocol (PVST)/Per VLAN Rapid
Spanning Tree Protocol (RPVST) Interface settings for the device.
To configure the PVST/RPVST Interface settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
Table 82. PVST/RPVST VLAN Configuration - VLAN Bridge Priority
0 4096 8192
12288
16384 20480
24576 28672 32768 (default)
36864 40960 45056
49152 53248 57344
61440