User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Get Started User Manual25
The login window opens.
5. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
Access the Switch When You Know the IP Address
The procedures in this manual assume that you know the IP address of your switch.
To access the switch over the local browser UI:
1. Launch a web browser such as Google Chrome, Mozilla Firefox, or Microsoft Internet
Explorer
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
Local Browser UI Buttons and User-Defined Fields
The following table shows the command buttons that are used on the pages in the local
browser UI:
Table 1. Local browser UI command buttons
Button Function
Add Clicking the Add button adds the new item configured in the heading row of a table.
Apply Clicking the Apply button sends the updated configuration to the switch. Configuration
changes take ef
fect immediately.
Cancel Clicking the Cancel button cancels the configuration on the page and resets the data on the
page to the previous values of the switch.
Delete Clicking the Delete button removes the selected item.
Refresh Clicking the Refresh button refreshes the page with the latest information from the device.
Save Clicking the Save button saves your settings.
Logout Clicking the Logout button ends the session.