User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Switching Information User Manual253
The following table describes the nonconfigurable MLD Snooping Configuration fields.
Configure an MLD Snooping Interface
To configure an MLD snooping interface:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Switching> Multicast > MLD Snooping > Interface Configuration.
All physical, VLAN, and LAG interfaces are displayed.
5. Use one of the following methods to select an interface:
• In the Go T
o Interface field, enter the interface in the unit/slot/port format and click on
the Go button.
Table 91. MLD Snooping Configuration
Field Definition
Multicast Control Frame Count The number of multicast control frames that have been processed by the
CPU.
Interfaces Enabled for MLD
Snooping
One or more interfaces on which MLD snooping is administratively enabled.
MLD snooping must be enabled globally and on an interface for the
interface to be able to snoop MLD packets to determine which segments
should receive multicast packets directed to the group address.
VLAN IDs Enabled For MLD
Snooping
Displays one or more VLANs on which MLD snooping is administratively
enabled.