User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Switching Information User Manual271
5. Use Address Aging Timeout (seconds) to specify the time-out period in seconds for aging
out dynamically learned forwarding information.
IEEE 802.1D-1990 recommends a default of 300 seconds. The value can be specified as
any number between 10 and 1000000 seconds.
The factory default is 300.
6. Click the Apply button.
Your settings are saved.
Configure a Static MAC Address
To configure a static MAC address:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Switching >
Address Table> Advanced > Static MAC Address.
5. Use Interface to select the physical interface/LAGs.
6. In the Static MAC Address field, type the MAC address.
7. Select the VLAN ID associated with the MAC address.