User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Switching Information User Manual272
8. Take one of the following actions:
• Click the Add button.
The static MAC address is added to the switch.
• Click the Delete button.
The static MAC address deleted from the switch.
Manage Port Settings
You can view and monitor the physical port information for the ports available on the switch.
Configure Port Settings
You can configure the physical interfaces on the switch.
To configure port settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Switching > Ports > Port Configuration.
5. In the Port column, select the check box for one or more ports or LAGs.
6. From the STP Mode menu, select the Spanning
Tree Protocol administrative mode for the
port or LAG.
The possible values are as follows:
• Enable. Enables the Spanning
Tree Protocol for this port.
• Disable. Disables the Spanning
Tree Protocol for this port.
The default is Enable.