User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Routing User Manual296
Manage Routes
The Routing Table collects routes from multiple sources: static routes and local routes. The
Routing Table can learn multiple routes to the same destination from multiple sources. The
Routing Table lists all routes.
Configure a Basic Route
To configure a basic route:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Routing> Routing T
able > Basic > Route Configuration.
5. In the Route T
ype list, select one of the following route types.
• Default.
To create a default route, all that must be specified is the next hop address,
and preference.
• Static.
To create a static route, specify the network address, subnet mask, next hop
address, and preference.
• Static Reject.
To create a static reject route, specify the network address, subnet
mask, and preference.
6. Network Address displays the IP route prefix for the destination.
7. Subnet Mask indicates the portion of the IP interface address that identifies the attached
network.
This is also referred to as the subnet/network mask.