User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Routing User Manual312
Configure the IP Interface
You can update IP interface data for this switch.
To configure the IP interface:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Routing> IP >
Advanced > IP Interface Configuration.
The page is shown in three parts.
IcmpOutSrcQuenchs The number of ICMP source quench messages sent.
IcmpOutRedirects The number of ICMP redirect messages sent. For a host, this is zero, since
hosts do not send redirects.
IcmpOutEchos The number of ICMP echo (request) messages sent.
IcmpOutEchoReps The number of ICMP echo reply messages sent.
IcmpOutTimestamps The number of ICMP timestamp (request) messages.
IcmpOutTimestampReps The number of ICMP timestamp reply messages sent.
IcmpOutAddrMasks The number of ICMP address mask request messages sent.
IcmpOutAddrMaskReps The number of ICMP address mask reply messages sent.
Table 110. IP Statistics (continued)
Field Description