User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Routing User Manual337
Display the ARP Entries in the ARP Cache
Use this page to display ARP entries in the ARP cache. The table lists the remote
connections most recently seen by this switch.
To display ARP entries in the ARP cache:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Routing> ARP > Basic >
ARP Cache.
The page displays the following information:
• IP Address. Displays the IP address associated with the system’
s MAC address.
This address must be the IP address of a device on a subnet attached to one of the
switch's existing routing interfaces.
• Port. Displays the associated unit/slot/port of the connection.
• MAC Address. Displays the unicast MAC address of the device.
The address is six
2-digit hexadecimal numbers separated by colons, for example, 00:06:29:32:81:40.
The pagination navigation menu functions as follows:
- Rows per page. Select how many table entries are displayed per page. Possible
values are 20, 50, 100, 200, and
All. If you select All, the browser might be slow to
display the information.
- <. Display the previous page of the table data entries.
- >. Display the next page of the table data entries.
5. T
o refresh the page with the latest information on the switch, click the Refresh button.