User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Routing User Manual343
6. Select a Split Horizon Mode radio button:
• None. No special processing for this case.
• Simple. A route is not included in updates sent to the router from which it was
learned. The default is Simple.
• Poison Reverse.
A route is included in updates sent to the router from which it was
learned, but the metric is set to infinity.
Split horizon is a technique for avoiding problems caused by including routes in updates
sent to the router from which the route was originally learned
7. In the Auto Summary Mode field, select the Enable or Disable option.
If you select Enable, groups of adjacent routes are summarized into single entries reduce
the total number of entries.
The default is Disable.
8. In the Host Routes Accept Mode field, select the Enable or Disable option.
If you select Enable, the router accepts host routes. The default is Enable.
9. In the Default Information Originate field, select to Enable or Disable default route
advertisement.
10. In the Default Metric field, specify a default value for the metric of redistributed routes.
This field displays the default metric if one has already been set, or 0 if one was not
configured earlier
. The valid values are 1 to 15.
11. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information that is displayed.
Configure Advanced RIP Interface Settings
To configure advanced RIP interface settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
Table 122. RIP Advanced Configuration
Field Description
Global Route Changes The number of route changes made to the IP route database by RIP.
This does not include the refresh of a route's age.
Global Queries The number of responses sent to RIP queries from other systems.