User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Routing User Manual349
This is the maximum length of time that the advertised addresses are to be considered as
valid router addresses by hosts.
11. Use Preference Level to specify the preference level of the router as a default router
relative to other routers on the same subnet.
Higher numbered addresses are preferred. You must enter an integer.
12. Click the Apply button.
Your settings are saved.
Configure Virtual Router Redundancy
Protocol
Configure Global VRRP Settings
To configure the global VRRP settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Routing > VRRP > Basic > VRRP Configuration.
5. In the Global Configuration Admin Mode field, set the administrative status of VRRP in the
router by selecting the Enable or Disable radio button.
By default, VRRP is disabled.
6. Select the VRID.