User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Routing User Manual350
The VRID field is configurable only if you are creating a new virtual router.
The valid values are 1 to 255.
7. Select the unit/slot/port for the new virtual router from the Interface menu.
8. In the Primary IP
Address field, enter the primary IP address of the virtual router.
9. From the Mode menu, select the Active or Inactive mode for the new virtual router
.
10. Click the Add button.
The virtual router is added to the switch configuration.
11. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information that is displayed.
Configure Advanced VRRP Settings
To configure the advanced VRRP global settings.
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Routing > VRRP >
Advanced > VRRP Configuration.
Table 125. VRRP Global Configuration
Field Description
Interface IP Address Indicates the IP address associated with the selected interface.
State The current state of the virtual router. Possible values are as follows:
• Initialize
• Master
• Backup