User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Routing User Manual352
Enter a number from 1 to 255. The default value is 1 second.
12. In the Primary IP
Address field, enter the IP address that is associated with the virtual
router.
The default is 0.0.0.0.
13. From the Authentication T
ype menu, select the type of authentication for the virtual router.
The options are as follows:
• 0-None. No authentication is performed. The default is None.
• 1-Simple.
Authentication is performed using a text password.
14. From the Status menu, select the Active or Inactive option to start or stop the operation of
the virtual router
.
The default is inactive.
15. Click the Add button.
The virtual router is added to the switch configuration.
16. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information that is displayed.
Table 126. Advanced VRRP Global Configuration
Field Description
Operational Priority Indicates the priority to be used for the virtual router master election
process. Higher values imply higher priority
.
• A priority of 0 is sent by the master router to indicate that this
router has ceased to participate in VRRP and a backup virtual
router transitions to become a new master
.
• A priority of 255 is used for the router that owns the associated IP
addresses.
Interface IP Address Indicates the IP address associated with the selected interface.
Owner Set to T
rue if the virtual IP address and the interface IP address are the
same, otherwise set to False. If this parameter is set to True, the virtual
router is the owner of the virtual IP address, and always wins an
election for master router when it is active.
VMAC Address The virtual MAC address associated with the virtual router, composed
of a 24-bit organizationally unique identifier
, the 16-bit constant
identifying the VRRP address block and the 8-bit VRID.
State The current state of the virtual router. Possible values are as follows:
• Initialize
• Master
• Backup