User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual39
5. To refresh the page, click the Refresh button.
The following table describes the nonconfigurable Temperature Status information.
View the Device Status
This page shows the software version of each device.
To view the device status:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Management > System Information > Device Status.
Table 9. Temperature Status information
Field Description
Unit ID The unit number in the switch.
MAC-A The current temperature (in degrees Centigrade) of the MAC-A sensor
of the switch.
The maximum is 31°C.
MAC-B The current temperature (in degrees Centigrade) of the MAC-B sensor
of the switch.
The maximum is 37°C.
System The current temperature (in degrees Centigrade) of the System sensor
of the switch.
The maximum is 31°C.