User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure OSPF and OSPFv3 User Manual392
5. Select the Default Information Originate Enable radio button.
Selecting Enable makes it possible to specify the other settings on this page. Selecting
Disable returns the other fields on this page to their default values.
6. Select the Always T
rue or False radio button.
When set to True, this field sets the router advertise. The default is False.
7. In the Metric field, specify the metric of the default route.
The valid values range from 0 to 16777214. The default is 0.
8. Select the Metric T
ype External Type 1 or External Type 2 radio button.
This sets the OSPFv3 metric type of the default route. The default is External Type 2.
9. Click the Apply button.
Your settings are saved.
Configure the Advanced OSPFv3 Settings
To configure the advanced OSPFv3 settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.