User Manual

Table Of Contents

M4300 Intelligent Edge Series Fully Managed Stackable Switches

Configure OSPF and OSPFv3 User Manual404

View and Clear OSPFv3 Interface Statistics

You can view and clear statistics for the selected interface. The information is displayed only

if OSPFv3 is enabled.

To view and clear the OSPFv3 interface statistics:

1. Launch a web browser

2. In the address field of your web browser

, enter the IP address of the switch.

The login window opens.

3. Enter admin as the user name, enter your local device password,

and click the Login

button.

The first time that you log in, no password is required. However, you then must specify a

local device password to use each subsequent time that you log in.

The System Information page displays.

4. Select Routing > OSPFv3 >

Advanced > Interface Statistics.

Designated Router The identity of the designated router for this network, in the view of the

advertising router. The designated router is identified here by its router ID. The

value 0.0.0.0 means that there is no designated router.

Note: This field displays only if the OSPFv3 admin mode is enabled.

Backup Designated Router The identity of the backup designated router for this network, in the view of the

advertising router

. The backup designated router is identified here by its router

ID. Set to 0.0.0.0 if there is no backup designated router.

Note: This field displays only if the OSPFv3 admin mode is enabled.

Number of Link Events This is the number of times the specified OSPF interface changed its state.

Note: This field displays only if the OSPFv3 admin mode is enabled.

Table 145. Advanced OSPFv3 Interface Configuration (continued)

Field Description