User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Multicast Routing User Manual421
5. In the Group IP field, enter multicast group IP address.
6. In the Egress VLAN List field, enter the VLAN or VLANs to which the multicast group IP
address belongs.
7. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information that is displayed.
Configure Global Multicast Settings
To configure global multicast settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
Table 153. Mroute Static-Multicast Configuration
Field Description
Maximum Multicast Static Address
Count
The maximum number of static multicast addresses that the Mroute table
can contain.
Current Multicast Static Address
Count
The number of static multicast addresses that were added to the Mroute
table.