User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Multicast Routing User Manual422
4. Select Routing > Multicast > Global Configuration.
5. In the Admin Mode field, select the Enable or Disable option to set the administrative
status of multicast forwarding in the router
.
The default is Disable.
6. Click the Apply button.
Your settings are saved.
The following describes the nonconfigurable information that is displayed.
Configure the Multicast Interface
To configure the multicast interface:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Routing > Multicast > Interface Configuration.
Table 154. Multicast Global Configuration
Field Description
Protocol State The operational state of the multicast forwarding module.
Table Maximum Entry Count The maximum number of entries in the IP multicast routing table.
Protocol The multicast routing protocol presently activated on the router, if any.
Table Entry Count The number of multicast route entries currently present in the multicast
route table.