User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Multicast Routing User Manual424
5. Select the Admin Mode Disable or Enable radio button.
This sets the administrative status of DVMRP to active or inactive. The default is Disable.
6. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information that is displayed.
Configure the DVMRP Interface
To configure the multicast DVMRP interface:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Routing> Multicast > DVMRP > Interface Configuration.
Table 155. DVMRP Global Configuration
Field Description
Version The current value of the DVMRP version string.
Total Number of Routes The number of routes in the DVMRP routing table.
Reachable Routes The number of routes in the DVMRP routing table that use a
non-infinite metric.