User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Multicast Routing User Manual428
The following table describes the nonconfigurable information that is displayed.
View the Multicast DVMRP Prune
To view the multicast DVMRP prune:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Routing> Multicast > DVMRP > DVMRP Prune.
5. T
o refresh the page with the latest information on the switch, click the Refresh button.
The following table describes the nonconfigurable information that is displayed.
Table 158. DVMRP Next Hop
Field Description
Source IP The IP address used with the source mask to identify the source
network for this table entry
.
Source Mask The network mask used with the source IP address.
Next Hop Interface The outgoing interface for this next hop.
Type The next hop type. Leaf means that no downstream dependent
neighbors exist on the outgoing interface. Otherwise, the type is
branch.
Table 159. DVMRP Prune
Field Description
Group IP The group address that was pruned.
Source IP The IP address used with the source mask to identify the source
network for this table entry
.