User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Multicast Routing User Manual431
6. Click the Apply button.
Your settings are saved.
Configure the IGMP Routing Interface
To configure the IGMP routing interface:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select the Routing> Multicast > IGMP > Routing Interface Configuration.
5. Use one of the following methods to select an interface:
• In the Go T
o Interface field, enter the interface in the unit/slot/port format and click on
the Go button.
• Next to the Interface column, select the check box for the interface that you want to
configure.
6. In the Admin Mode field, select the Enable or Disable option to set the administrative
status of IGMP on the selected routing interface.
The default is Disable.
7. In the V
ersion field, enter the version of IGMP to configure for the selected interface.
Valid values are 1 to 3. The default value is 3. This field is configurable only when IGMP
Interface mode is enabled.
8. In the Robustness field, enter the robustness value.