User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Multicast Routing User Manual434
View IGMP Groups
To view the IGMP groups:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Routing> Multicast > IGMP > IGMP Groups.
5. Use the Search menu to search for multicast entries by interface or group:
• Select Interface from the menu, enter the interface in unit/slot/port format (for
example 1/0/13), and click the Go button.
If the entry exists, the entry is displayed as the first entry, followed by the remaining
entries.
• Select Group from the menu, enter the multicast group IP address, and click the Go
button.
If the entry exists, that entry with the matching group is displayed as the first entry,
followed by the remaining entries. An exact match is required.
6. To refresh the page with the latest information on the switch, click the Refresh button.
The following table describes the nonconfigurable information that is displayed.
Table 162. Multicast IGMP Groups
Field Description
Interface The interface for which data is to be displayed.
Multicast Group IP The IP multicast group address for which data is to be displayed.
Last Reporter The IP address of the source of the last membership report received for
the IP multicast group address on the selected interface.