User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Multicast Routing User Manual436
5. Use the Search menu to search for multicast entries by interface or group IP address.
• Select Interface from the menu, enter the interface in unit/slot/port format (for
example, 1/0/13), and click the Go button.
If the entry exists, the entry is displayed as the first entry, followed by the remaining
entries.
• Select Group IP from the menu, enter the multicast group IP
, and click the Go button.
If the entry exists, that entry with the matching group IP address is displayed as the
first entry
, followed by the remaining entries. An exact match is required.
6. To refresh the page with the latest information on the switch, click the Refresh button.
The following table describes the nonconfigurable information that is displayed.
Configure the IGMP Proxy Interface
To configure the IGMP proxy interface:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
Table 163. Multicast IGMP Membership
Field Description
Interface The interface on which multicast packets are forwarded.
Group IP The IP multicast group address for which data is to be displayed.
Compatibility Mode This parameter shows group compatibility mode (v1, v2, and v3) for this
group on the specified interface.
Source Filter Mode The source filter mode (Include, Exclude, or NA) for the specified
group on this interface. When NA mode is active, the field is blank.
Source Hosts This parameter shows source addresses that are members of this
multicast address.
Expiry Time This parameter shows expiry time interval against each source address
that are members of this multicast group.
This is the amount of time
after which the specified source entry is aged out.