User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Multicast Routing User Manual442
5. In the SSM Group Address field, enter the source-specific multicast group IP address.
6. In the SSM Group Mask field, enter the source-specific multicast group IP address
mask.
7. Click the Add button.
The source-specific group is added.
Configure PIM Interface
To configure the multicast PIM interface:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Routing> Multicast > PIM > Interface Configuration.
5. Use one of the following methods to select an interface:
• In the Go T
o Interface field, enter the interface in the unit/slot/port format and click on
the Go button.