User Manual

Table Of Contents

M4300 Intelligent Edge Series Fully Managed Stackable Switches

Configure Multicast Routing User Manual445

4. Select Routing> Multicast > PIM > Candidate RP Configuration.

The following table describes the nonconfigurable information that is displayed.

View the PIM Neighbor

To view the multicast PIM neighbor:

1. Launch a web browser

2. In the address field of your web browser

, enter the IP address of the switch.

The login window opens.

3. Enter admin as the user name, enter your local device password,

and click the Login

button.

The first time that you log in, no password is required. However, you then must specify a

local device password to use each subsequent time that you log in.

The System Information page displays.

4. Select Routing> Multicast > PIM > PIM Neighbor.

Table 169. Multicast PIM Neighbor

Field Description

Interface The interface on which the neighbor is displayed.

Neighbor IP The IP address of the PIM neighbor for this entry.

Up Time (hh:mm:ss) The time since this PIM neighbor (last) became a neighbor of the local

router

Expiry Time (hh:mm:ss) The minimum time remaining before this PIM neighbor is aged out.