User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Multicast Routing User Manual452
Configure the IPv6 PIM Global Settings
To configure the IPv6 PIM global settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Routing> IPv6 Multicast > IPv6 PIM > Global Configuration.
5. Select an
Admin Mode radio button.
The options are Disable, or the protocol variant of PIM option, dense mode (PIM-DM) or
sparse mode (PIM-SM).
By default, this setting is disabled. The Disable option sets the administrative status of
PM in the router to active or inactive.
6. Click the Apply button.
Your settings are saved.
Protocol The multicast routing protocol which created this entry. The possible values
are as follows:
• PIM-DM
• PIM-SM
Flags The value displayed in this field is valid if the multicast routing protocol
running is PIM-SM.
The possible values are RPT or SPT. For other
protocols a – (hyphen) is displayed.
Table 172. Multicast Mroute Table (continued)
Field Description