User Manual

Table Of Contents

M4300 Intelligent Edge Series Fully Managed Stackable Switches

Configure Multicast Routing User Manual459

9. Click the Add button.

The static RP address is added for one or more multicast groups.

10. Click the Apply button.

Your settings are saved.

Configure IPv6 MLD Global Settings

To configure the IPv6 PIM global settings:

1. Launch a web browser

2. In the address field of your web browser

, enter the IP address of the switch.

The login window opens.

3. Enter admin as the user name, enter your local device password,

and click the Login

button.

The first time that you log in, no password is required. However, you then must specify a

local device password to use each subsequent time that you log in.

The System Information page displays.

4. Select Routing> IPv6 Multicast > MLD > Global Configuration.

5. Select the

Admin Mode Disable or Enable radio button.

This sets the administrative status of MLD in the router to active or inactive. The default is

Disable.

6. Click the Apply button.