User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual46
View USB Device Information
To display the USB device information:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select System > Management > USB Device Information.
The Device Status field displays the current status of the device. The status is one of the
following:
• Active.
The device is USB plugged in and recognized by the switch.
• Inactive.
The device is not mounted.
• Invalid.
The device is not present or an invalid device is plugged in.
5. T
o refresh the page, click the Refresh button.
The following table describes the USB Memory Statistics information.
Table 13. USB Memory Statistics information
Field Description
Total Size The USB flash device storage size in bytes.
Bytes Used The size of memory used on the USB flash device.
Bytes Free The size of memory free on the USB flash device.